Code

"Hitler's Computers": How Germany Became the Birthplace of Programmable Machines

"Hitler's Computers": How Germany Became the Birthplace of Programmable Machines

Free course: “Quick start in Python»

Learn More

World War II became a catalyst for the development of computers. Amid the global conflict, nations were actively developing new weapons, building factories, and developing infrastructure. However, to perform complex calculations, engineers of the time used slow slide rules and adding machines, which significantly slowed the development process. The war created a need for more efficient computing devices, which ultimately led to significant advances in computer technology.

In the mid-20th century, the world faced a growing need for powerful computing devices. The first computers, which appeared in the 1940s, were electromechanical. Unlike modern machines that use transistors, these early devices were based on relays. These innovations ushered in the era of computing, shaping the future of information systems and computer engineering.

Inventor of the First Computers

Konrad Zuse is a name few know, although he is the creator of the world's first computer with program control. His achievements are recognized not only in Germany, but also in the United States and Great Britain, where there is a debate about who is the father of the first computers. Zuse played a key role in the development of computing technology, and his inventions marked the beginning of the era of modern computers.

Konrad Zuse at work. Photo: Computer History Museum

Zuse created machines in Nazi Germany, which led to them being called "Hitler's computers." However, it is important to note that the inventor himself was not a member of the party and did not support its ideology, although he did not speak out against it openly. It should be emphasized that his devices did not have a significant impact on the course of the war.

A computer made from a typewriter and a vacuum cleaner

Konrad Zuse did not develop computers at the beginning of his career. During his studies, he was faced with the need to perform complex calculations using a slide rule. In 1935, he completed his studies and received an engineering degree, after which he got a job at an aircraft factory. His experience and knowledge in engineering became the basis for further research and development in the field of computing technology. Zuse pioneered the creation of the first programmable computers, which subsequently changed the entire computing industry.

Berlin is an attractive city that offers young people many opportunities to have a good time, including meeting interesting girls. However, instead, we had to deal with complex calculations.

Konrad Zuse was a prominent German engineer and inventor who is considered one of the founders of computing. He was born on June 22, 1910, in Königsberg, Germany, and made significant contributions to the development of the first programmable computers. Zuse developed his first computer, the Z3, in 1941, which was the world's first fully automatic, programmable, and relay-based computer. His work laid the foundations for subsequent computing systems and programming.

Zuse also created a programming language that was adapted to work with his machines, which contributed to the development of programming as a science. After World War II, he continued to work on improving computing technology and founded a company that manufactured computers. Konrad Zuse's contributions to technology and computer science are difficult to overestimate, as his developments became the basis for modern software and hardware.

His legacy remains relevant and continues to inspire a new generation of engineers and scientists striving to advance computing. Konrad Zuse remains a key figure in the history of computing, and his achievements continue to influence modern technology.

Zuse conceived of an automatic machine for performing routine calculations while still a student. After a year of working in a factory, he decided to quit and began assembling his first computer.

In 1938, a working model of an electromechanical computer, called the Z1, was built in Konrad Zuse's family home. This model was an important step in the history of computing and marked the beginning of the era of modern computing. The Z1 was the first of its kind and demonstrated the potential for automated computing, which subsequently led to significant advances in computer technology.

A copy of the Z1 at the German Museum of Technology in Berlin. Photo: German Museum of Technology

The computer processes and stores data in binary code, abandoning the decimal system. Konrad Zuse lacked sufficient funding, so he used available materials. In particular, he used metal plates as switches, and together with friends, he hand-made 20,000 of these plates using a jigsaw.

A keyboard modified from a typewriter was used for data entry, and the results were displayed using a panel with flashing lights. This solution ensures convenient input and clear information output.

Zuse's device weighed 500 kilograms and used a vacuum cleaner motor. Despite its dimensions, it possessed almost all the functional elements of modern computers, including memory registers, an arithmetic logic unit, and input and output interfaces. This rare computer was a milestone in the history of computing, showcasing early advances in computer design and architecture.

The Z1 had a dedicated memory block consisting of 64 words of 22 bits. This machine could process 22-bit floating-point numbers, allowing it to perform mathematical operations. Addition of numbers took 5 seconds, and multiplication took 10 seconds. To obtain a result, the Z1 shifted the plates in a strictly defined order, which ensured the accuracy of calculations.

Early computing systems did not use conditional branches and loops. The software, consisting of 9 instructions, was not stored in the computer's memory, which meant that each instruction had to be manually entered when executing the program. This limitation significantly complicated the programming process and increased the time it took to complete tasks.

The Z1 was a demonstration model that could not be used in practice. It frequently crashed and made calculation errors. Nevertheless, this prototype confirmed the possibility of creating a programmable computer.

A Computer on Old Telephone Relays

Zuse spent a long time searching for funding to create a more advanced model. However, this was not the only difficulty – the outbreak of World War II, which led to the loss of contacts with colleagues in the USA and Great Britain.

Engineer Helmut Schröer recommended his friend to replace the metal plates with vacuum tubes. Together they presented this idea to the University of Berlin, but they were rejected, called dreamers. To implement the project, they needed two thousand radio tubes and several thousand incandescent lamps, but at that time no one used more than a hundred radio tubes in a single device.

Zuse approached businessmen with the idea of ​​​​creating a computer, but was rejected, since all the main discoveries in this area had already been made. Then the scientist decided to turn to the military, proposing them to develop a device for aviation calculations. However, when the military learned that the project would take two years to complete, they abandoned the project, as the country was eager to win the war quickly.

In 1940, the Aerodynamic Research Institute provided support to the inventor, allowing him to begin construction of the Z2 model. The device's design replaced the plates with more reliable electromechanical relays. Due to a lack of funding, parts taken from telephone sets were used.

By the end of 1940, the Z2 model was completed. Its computing unit consisted of 800 relays, and its memory still used plate technology. Data was entered using a keyboard and punched tape; Konrad Zuse used old film to punch the holes. The Z2 memory block had a capacity of 16 words by 16 bits. Multiplication was performed in 5 seconds, and addition in 0.8 seconds. This model marked an important step in the development of computing technology and demonstrated high performance for its time.

Machine for calculating the flight of cruise missiles

Zuse soon began developing the Z3, which retained the logical structure of the previous Z1 and Z2 models, but decided to abandon the plates completely. The Z3 computer was completed in December 1941. This model was an important step in the development of computing technology, as the Z3 was the first programmable computer using binary code.

Konrad Zuse near a copy of the Z3 in the Deutsches Museum in Munich. Photo: Deutsches Museum in Munich

The Z3 demonstrated significantly higher reliability and performance compared to previous models. This computer weighed one ton and had a memory capable of storing 64 floating-point numbers with 22 digits. It performed multiplication and division operations in 3 seconds, while addition took only 0.7 seconds. The Z3 was a major step forward in computing, providing faster and more efficient data processing.

The Z3 has the ability to handle arithmetic exceptions, such as division by zero and operations with numbers exceeding 10^20. This allows it to perform calculations autonomously, without the need for constant operator supervision.

The Z3 had practical application in calculating the parameters of the first V-1 cruise missiles. Later, Zuse shared his experience with the military, emphasizing the importance of computers in the defense sector. The use of Z3 demonstrated how modern technologies can significantly speed up and simplify the process of developing military equipment, opening up new horizons in the field of automated calculations and data analysis.

Inventors often become Faustian idealists, striving to improve the world, but face harsh reality. To realize their ideas, they need to interact with forces that have clear and categorical views. In the modern world, such forces are, first and foremost, the army and the state administrative apparatus. In my experience, the chances of success for those who try to avoid this interaction are minimal.

Konrad Zuse was an outstanding German engineer and inventor, known as one of the pioneers of computer technology. He was born on June 22, 1910, in Königsberg and was the first to design and build a programmable computer. His most famous work is the Z3, which was completed in 1941 and became the world's first fully automatic, programmable, and digital computer.

Zuse also created a programming language that allowed users to write programs to control his machines. His work laid the foundation for the further development of computer technology and software. In the post-war years, Konrad Zuse continued his research and development of new computers, including the Z4, which became the first commercially available computer.

Zuse's contribution to the history of computing is invaluable, and his ideas continue to influence modern programming and computer science. Zuse received numerous awards for his achievements, and his legacy lives on in every computer today.

Today, the Z3 is recognized as the world's first functional programmable computer. This revolutionary device, created by Konrad Zuse in 1941, became the founder of digital computing and had a significant influence on the further development of computing technology. The Z3 used relay technology and was capable of performing complex mathematical operations, which opened new horizons for computing machines.

The Computer That Was Hidden in the Basement

After handing over the Z3 to the customer, Zuse began designing the Z4. The main goal of this project was to create a machine suitable for mass production. The Z4 was intended to be a more efficient and reliable solution that would meet the requirements of mass production.

At the same time, Zuse was working on creating the first high-level programming language that could be used to perform complex calculations. This language was called Plankalkül, which means "plan calculus" in German. Plankalkül included such important elements as loops, conditional statements, subroutines, arrays, hierarchical data structures, and exception handling mechanisms. The development of this language was a significant step forward in programming and computing technology, opening new horizons for solving mathematical and engineering problems.

Learn more about Plankalkül, machine code, and the first programmer in the article "Ahead of Its Time: Which Programming Language Is Considered the First?" This article examines key aspects of early programming languages ​​and their influence on modern technology, as well as the role of Plankalkül in the history of programming.

By December 1944, the Z4 computer was nearly completed, but it was nearly destroyed during the bombing of Berlin. Fortunately, Konrad Zuse managed to save the Z4, transporting it to a remote village in the Alps, where he stored the device for three years. This step preserved an important milestone in the history of computing and prepared the computer for further development.

The machine was finally completed in 1950 and, at that time, was the only digital computer in Europe. The Z4's architecture resembled modern personal computers: memory and processor were separate components, and programs were stored on tape and executed sequentially. The Z4's memory used 32-bit machine words, unlike previous models, which used 22-bit words. This innovation significantly expanded computing capabilities and increased performance, making the Z4 a major step in the development of computer technology.

The Z4 operated at 30 Hz and was capable of processing floating-point numbers. It performed addition, subtraction, multiplication, and division, as well as square root extraction and exception handling. A decimal keyboard and a punched tape reader were used for input, while output was provided by a Mercedes typewriter. The Z4 was an important step in the development of computing, demonstrating the capabilities of early electronic devices in mathematical calculations.

The Z4 computer had a special program preparation device. With it, developers could create and edit program code, which was then transferred to punched tape for later use. This process automated tasks and significantly simplified the work of programmers at the time.

Computers were used to perform complex calculations until 1960. One of the first such computers can currently be seen at the Deutsches Museum in Munich. This museum is an important center where visitors can learn about the history of computing and its development over the decades.

Operators at the Z4 control panel, 1955. Photo: ETH Zurich
Z4 relay cabinets. Photo: ETH Zurich
Z4 control panel, 1950. Photo: Konrad Zuse Internet Archive

In the 1950s, Konrad Zuse founded his own business and began producing computers. During this period, the Z5, Z11, Z22, and Z23 models became particularly popular. With the development of the Z22, Zuse introduced magnetic storage media, which was a significant step forward in the field of computing and contributed to the development of computer technology.

Zuse's computers found use in aviation and educational institutions. However, in the 1960s, they began to be replaced by American electronic computers. Zuse's company was acquired by Siemens, and the inventor was given a consulting position. In 1987, with funds from Siemens, Zuse created a copy of his first computer, the Z1. Currently, a functioning Z1 is on display at the National Museum of Technology in Berlin, highlighting the significance of its contribution to the development of computing.

Read also:

  • From Ancient Egypt to Decoding the Genome: What Programming Really Is
  • How Programming Languages ​​Developed
  • Refal, El, and Rapier. Where did the Soviet programming languages ​​go?